Copy and paste link below in your browser.
http://www.facebook.com/pages/Chicago-IL/All-Temp-Chicagoland-Heating-Air-Conditioning/149326252992?ref=mf

Then click on “become a fan.”

All fans will be entitled to “fan only” promotions throughout the season.

Thanks

Okay, maybe you’ve been putting off buying a new high-efficiency furnace because, well, the old one hasn’t pooped out yet. But it might be time to rethink that plan, especially since, if your old furnace is 6 to 10 years old, it’s an energy-guzzler, and the money it’s costing you to heat your home is costing you oodles more than a new HI-EF MODEL. Plus, if you need another incentive, the word is out: Uncle Sam’s $2500 Tax Credit may be history. Now that you’re armed with a few facts, here’s another one–A BIG ONE–that will really save you money. Buy your new furnace now through September before the Chicago cold snap. Manufacturers like Bryant (one of the best brand you can buy), is already shipping their newest models
to companies like All Temp. And they want to keep shipping and selling furnaces throughout the year. So to get the pipeline moving, dealerships like All Temp offer big savings if you buy pre-season. Lots of bonus stuff too. Plus, you get incredible attention to detail because their phone isn’t ringing off the hook from people who are freezing their January assets off. You do remember what Chicago is like in January, don’t you? Best of all, it doesn’t cost you a penny to get an in-home estimate. Yes, it’s free! So don’t put off saving today what you will be spending tomorrow. For more helpful, money-saving tips, call 1-800-All-Temp.

Chicagoans like their Summers hot, but love to return to a cool, comfortable home. But who wants to spend extra money on utilitiy bills? So reduce your home’s energy bills by about 10 percent by turning up your Programmable Thermostat when your at work or heading for bed. If you don’t have one, get one and use it. Here’s another tip: Did you know that installing an air conditioner in a shady spot could increase its efficiency up to 10 percent? That makes sense. Here another tip: Run your dishwasher, washer, and dryer in the early morning or late evening. These appliances create heat and your air conditioner won’t have to work as hard to offset the heat produced. But most important, dirty, clogged air condition units decrease the efficiency of your cooling system. We offer these clean & check service for thousands, for only $89. Enjoy your Summer.

Peoples Gas Company has introduced a rebate of $250 for the installation of a new high efficiency furnace or new high efficiency boiler is ending on April 30th, 2010. The new furnace or boiler must be intalled by that date.  Not only is this $250 available but also a Federal Tax Credit of up to $1500 could be added to your savings. In addition the State of Illinois Recovery Act Rebate of as much as $850 for High Efficiency Furnaces and Air Conditioneers is added to All Temp’s sale prices which can save you as much as 15% too. When you add all this up you could SAVE as much as 50% on a new high efficiency furnace and air conditioning system  or high efficiency boiler installation by having others pay a large portion of your normal cost but your time is limited so call All Temp now. The rebate on a 95% high efficient boiler is $400. This time the Gas Co. has announced that the date for last install is April 30th, 2010 or until funds are depleted. The phrase until funds are depleted has not been mentioned before. This is a sure indication that the program will end soon and installations of new high efficiency furnaces or high efficiency boilers should not be put off the money is about to run out.

If your needs are just routine maintanence or service or repair of your existing furnace or boiler then call All Temp and we can help you with that as well. Keep in mind that sometimes when you need an expensive repair it is usually better to have a new high efficieny furnace or boiler installed. That new furnace or boiler will have a long term warranty, save you hugh dollars on your energy cost and you could qualify for the savings in Rebates, Tax Credits and All Temp’s usual discounted sale prices.

The North Shore Gas Company Rebate of $250 for the installation of a new high efficiency furnace or new high efficiency boiler is ending on March 15th, 2010. The new furnace or boiler must be intalled by that date. So if you are located in Deerfield, Evanston, Glencoe, Glenview, Highland Park, Kenilworth, Morton Grove, Niles, Park Ridge, Wilmette or Winnetka and a customer of North Shore Gas Co. you must act now. Not only is this $250 available but also a Federal Tax Credit of up to $1500 could be added to your savings. In addition the State of Illinois Recovery Act Rebate of as much as $850 for High Efficiency Furnaces and Air Conditioneers is added to All Temp’s sale prices which can save you as much as 15% too. When you add all this up you could SAVE as much as 50% on a new high efficiency furnace or boiler installation by having others pay a large portion of your normal cost but your time is limited so call All Temp now. The rebate on 95% high efficient boiler is $400. This time the Gas Co. has announced that the date for last install is March 15, 2010 or until funds are depleted. The phrase until funds are depleted has not been mentioned before. This is a sure indication that the program will end soon and installations of new high efficiency furnaces or high efficiency boilers should not be put off the money is about to run out.

If your needs are just routine maintanence or service or repair of your existing furnace or boiler then call All Temp and we can help you with that as well. Keep in mind that sometimes when you need an expensive repair it is usually better to have a new high efficieny furnace or boiler installed. That new furnace or boiler will have a long term warranty, save you hugh dollars on your energy cost and you could qualify for the savings in Rebate, Tax Credits and All Temp’s usual discounted sale prices. If you just want an estimate for a new furnace installation or new boiler installation and your location is Deerfield, Evanston, Glencoe, Glenview, Highland Park, Kenilworth, Morton Grove, Niles, Park Ridge, Wilmette or Winnetka we are local and service these suburbs 24/7.

For any minor repair or routine service or maintanence of you heating system, either a furnace or a boiler, call All Temp we provide all Heating and Air Conditioning services to North Shore communities like Deerfield, Evanston, Glencoe, Glenview, Highland Park, Kenilworth, Morton Grove, Niles, Park Ridge, Wilmette and Winnetka.

To keep up with the demand for faster and improved, local heating service for Deerfield and other communities on Chicago’s North Shore, All Temp has increased the number of techs and serviceman now in the area. Residents will notice new service vehicles in their neighborhoods featuring the “Bryant Man.” With added fleets of vehicles in these northern suburbs, response time for emergency service is improved,
and appointments for service are more precise, so customers aren’t spending the day waiting. “It is our goal,” say Robbie Mehrholz, owner of All Temp, “to not only provide our customers with the most knowledgeable service people and best equipment, but to provide the fastest, friendliest service.” All Temp has been servicing the Deerfield and North Shore Communities since 1938. The company was founded by Walter Mehrholz, and remains a family owned and operated company.

Q. Why does the temperature vary from room to room?

A. Could be a number of reasons. 1) Your vents in each room may need adjustments. 2) If the cooler rooms are the furthest from your furnace, you may require blowers to deliver the warm air to these rooms. 3) Your thermostat may not be located in the ideal location. Your thermostat reads the temperature where it is located. 4) Your furnace may be pooped out and you may want to explore a newer, more efficient model. 5. Even the humidity affects temperature. You may need to change filters, change humidity level, or get a new humidifier.

There are other reasons. All Temp can likely identify the problem and solution in short order, so consider scheduling a service appointment or hang in there until summer…then call us about your warmer rooms.

The North Shore Gas Company Rebate of $450 for the installation of a new high efficiency furnace or new high efficiency boiler is ending on January 15th, 2010. The new furnace or boiler must be intalled by that date. So if you are located in Deerfield, Evanston, Glencoe, Glenview, Highland Park, Kenilworth, Morton Grove, Niles, Park Ridge, Wilmette or Winnetka and a customer of North Shore Gas Co. you must act now. Not only is this $450 available but also a Federal Tax Credit of up to $1500 could be added to your savings. All Temp’s sale prices can save you as much as 15% too. When you add all this up you could SAVE as much as 48% on a new high efficiency furnace or boiler installation by having others pay a large portion of your normal cost but your time is limited so call All Temp now.

If your needs are just routine maintanence or service or repair of your existing furnace or boiler then call All Temp and we can help you with that as well. Keep in mind that sometimes when you need an expensive repair it is usually better to have a new high efficieny furnace or boiler installed. That new furnace or boiler will have a long term warranty, save you hugh dollars on your energy cost and you could qualify for the savings in Rebate, Tax Credits and All Temp’s usual discounted sale prices. If you just want an estimate for a new furnace installation or new boiler installation and your location is Deerfield, Evanston, Glencoe, Glenview, Highland Park, Kenilworth, Morton Grove, Niles, Park Ridge, Wilmette or Winnetka we are local and service these suburbs 24/7.

For any minor repair or routine service or maintanence of you heating system, either a furnace or a boiler, call All Temp we provide all Heating and Air Conditioning services to North Shore communities like Deerfield, Evanston, Glencoe, Glenview, Highland Park, Kenilworth, Morton Grove, Niles, Park Ridge, Wilmette and Winnetka.

Today we are back with more Evolution system information as promised in the last of this series. Remember Evolution is a control system that works with Bryant Evolution Furnaces and Air Conditioners only. The user interface device replaces a common thermostat and does so much more. Please read the previous post dedicatied to the basics that covers this topic in great detail.

All Temp when they install your new Evolution heating and air conditioning system can also add a System Access Module (you could add it to your existing system also). This Module is wired directly to the furnace and interface device and communicates with the outside world via the internet or phone connection. A subscription to Skytel allows you to log on to your system and do any of the following. First you can set the system mode for either heating, cooling or auto changover. Change the heating temperature or cooling temperature and set the hold time for that changed temperature as well. There are 4 fan speeds or modes to set remotely if you wish. When you add the optional zoning system you can also set the temperature for each room or zone remotely - more on that fantastic feature in the next installment of this series.

When you want to reset the program for times and temperature changes that’s also available remotely. Program each day or all days of the week independently while you are on vacation or out of town on business. Vacation settings are also system mode as before, Heat and Cool Temperature settings, Fan speed changes and both the start and end date and times. That’s correct if you need to return home early or are able to stay a little longer than expected when you left just change those setting from a local Starbucks while you enjoy a latte. All this is part of the new heating and cooling technologies available from Bryant and All Temp Chicagoland Heating and Air Conditioning, Inc.

Remember when you need assistance with any make or model of heating and air conditioning equipment including both steam and hot water boilers just call 1-800-ALL-TEMP for 24/7 service and repair. We are always here to help. Next time we will finish up the Evolution series with the Evolution zoning system. It’s really cool - cant’ wait. See you then.

When you are in need of fast 24/7 service to repair either a furnace or a boiler in Chicago or any of its suburbs just call 1-800-ALL-TEMP and you will get All Temp Chicagoland Heating and Air Conditioning. All Temp is a family owned local company that is celebrating being in business since 1938. All Temp is the Chicago Metro’s oldest and largest heating and cooling service and installing contractor for Bryant one of the best known brands for furnaces or boilers. But All Temp doesn’t stop there they can repair any brand of furnace or boiler. Maybe you just need that newer furnace or boiler tuned up and cleaned & checked so it can heat your home to it’s tip top performance. That way you will have the confidence to go throughout the heating season knowing your furnace or boiler will heat at the utmost efficiency for which it was designed. That keeps your fuel bills as low as possible in the cold winter ahead.

Right now is the best time to service that furnace or boiler if you live in the Chicago Metro area including most of it’s suburbs. All Temp is always very busy on the first very cold nights so call now and avoid the rush. You can save $30 on a service repair of your furnace or boiler. In addition, for a limited time, special savings are available on routine service and maintanence of your heating equipment so call All Temp at 1-800-ALL-TEMP.

If instead you have an older furnace or boiler then All Temp Chicagoland Heating & Air Conditioniong, Inc. can also install a new high efficient furnace or high efficient boiler so you can Go Green and Save Green!! Act now because there is a Federal Tax Credit of up to $1500 for purchasing a new high efficiency furnace or high efficiency boiler for a limited time. From now until January 15th 2010 any customer of Peoples Gas Co. or North Shore Gas Co. can also get up to a $450 rebate for the purchase and installation of that new high efficient furnace or new high efficient boiler.

Of course All Temp is having a Sale to go along with all those Tax Credits and Rebates, therefore prices have never been lower. In almost every case you can purchase the world’s best furnace for a few dollars less than what is normally considered the better furnace. Don’t have enough money to afford the world’s best furnace? Don’t worry call All Temp. They have a wide variety of furnaces available and can provide comfortable financing to qualified buyers. You will get a low price and a comfortable payment. Why not start saving fuel now? Be smart call All Temp now at 1-800-ALL-TEMP and become one of their pampered Dicount Comfort Club Customers. They will describe all the benefits of being a Discout Comfort Club Member, but it really is all about big savings everyday on your heating and air conditioning service and installation needs.

All Temp has Chicagoland’s most pampered customers with their Discount Comfort Club! They are smart people who save a lot too!

We’re back to talk about the Evolution control system for Bryant Evolution Heating & Cooling systems. It is really revolutionary therefore the name. The Evolution control is amazing in what it can do for you and your comfort. This control system is the industries most complete comfort system interface. My favorite feature is auto change over from heating to cooling and vise versa. In my family we have a member who has a chronic illness. When the temperature or humidity swing outside a 3 degree and/or a 10% range she is intolerably uncomfortable. Constant purification of the air is a necessity as well (more on that in another post). There are those May and September days when overnight it’s cool and during the day it’s hot. My Evolution control keeps the temperature within a 2 degree difference without the need of being changed from Heat to Cool - it’s automatic!

I recall an early September night when the temperature was mild but it was very humid. That night the Air Conditioner ran with the furnace blower on its lowest setting, very very slow, which removes the humidity without lowering the temperature. When the Air Conditioner runs on a standard system it will cool rather than dehumidify leaving you cold and clamy. That’s a very uncomfortable feeling wouldn’t you agree?

Here is a list of all the things in a system the Evolution control will manage and control: temperature, humidity, dehumidification, ventilation and indoor air quality all from one central location. Naturally it is fully programable but it is easy to program. It kind of looks like a PDA and is shaped like one with a screen that is large and backlit. The temperature display is the largest in the industry and easy to see from across a very large room. That screen has on screen prompts for programing and adjusting the Evolution control with just a few buttons. It really is very intuitive and easy to use and understand. That’s called user friendly right? Being able to program this control gives you the ultimate in energy efficiency and comfort. You can run a different program for each of the 7 days of the week. So it follows your schedule and lifestyle both. When you’re away it’s easy to set the vacation mode and tell the Evolution control when you will return. It keeps both the heating and cooling at reasonably low settings so it saves energy for you while you are away. Bryant says this feature alone can save you as much as 30% on your fuel bills.

Another great feature is the Evolution controls ability to control the fan speed on your Evolution Heating & Cooling System. There are three speeds plus auto to choose from. In my home we use Med speed continuous fan so that the air purification system cleans all the air in our home 3 times every hour. That’s right it cleanses all the air in our home 72 times every day. You can’t even hear it running while its smoothly giving us complete comfort and truly clean air. It makes an environment that’s better for my health too. Additional devices it manages for you are notices to change filters, humidifier water panels and UV Lamps. I love it - great idea Bryant!

This Evolution control is really a user interface device as all the brains are built into the control board on the Evolution furnace or fan/coil like your computer. Because of this you can install the Evolution control in any existing home that has standard 4 wire thermostat wire (that’s just about anywhere). Think of it as a periferal for your furnace like the screen and keyboard are with your computer. The 4 wire is just a serial interface so installation by All Temp is really easy and the cost is very low.

With the Evolution control there are pop up messages reminding you to change filters or other accessories. The air filter change notice uses a unique way of deciding when to notify you. Instead of being a timed message like other not so similar controls it has the furnace measure the static pressure drop across the filter so you change the filter when it’s loaded not just a regular time. That saves on unnecessary changes of filters that haven’t been used long enought yet.

Want a great warranty from the factory? How’s 10 years on the part and labor as well. That’s a full factory warranty on your Evolution control when combined with your All Temp 95% efficient 355CAV High Efficiency Evolution Furnace. Remember the 355CAV is the world’s best furnace but the Evolution control makes it even better. All Temp who is Bryant’s oldest and largest dealer in the Chicagoland area will back up that factory warranty.

One last thing about the Evolution control - imagine a device that tells you and your dealer when something is wrong with the system. That’s right it is smart enough to let you know when it needs a furnace repair or an air conditioner repair. So in the Chicago and Suburban area if you need 24/7 furnace or air conditioner repair just call at 1-800-ALL-TEMP or read next time and learn how your Evolution control will do it for you. There are two accessory devices you can add to your Evolution control one is remote access and the other is zoning. Both are really cool! Until next time we bid you peace.